Tritium distribution analysis of Be limiter tiles from JET-ITER like wall campaigns using imaging plate technique and β-ray induced X-ray spectrometry

S. E. Lee; Y. Hatano; M. Hara; S. Masuzaki; M. Tokitani; M. Oyaizu; H. Kurotaki; D. Hamaguchi; H. Nakamura; N. Asakura; Y. Oya; J. Likonen; A. Widdowson; S. Jachmich; K. Helariutta; M. Rubel

doi:10.1016/j.fusengdes.2020.111959

Tritium distribution analysis of Be limiter tiles from JET-ITER like wall campaigns using imaging plate technique and β-ray induced X-ray spectrometry

S. E. Lee, Y. Hatano, M. Hara, S. Masuzaki, M. Tokitani, M. Oyaizu, H. Kurotaki, D. Hamaguchi, H. Nakamura, N. Asakura, Y. Oya, J. Likonen, A. Widdowson, S. Jachmich, K. Helariutta, M. Rubel

Laboratory for Plasma Physics

Onderzoeksoutput: Bijdrage aan een tijdschrift › Artikel › peer review

Samenvatting

Tritium (T) distribution on the plasma-facing surfaces (PFSs) and inside castellation of Be limiter tiles from the JET tokamak with the ITER-like wall (ILW) was analyzed using imaging plate (IP) technique and β-ray induced X-ray spectrometry (BIXS). Regarding to PFSs, the outer poloidal limiter (OPL) showed significantly higher T concentrations than the inner wall guard limiter (IWGL) and upper dump plate (DP). The concentration of T on OPL was high at the central part. However, deuterium (D) and metallic impurities showed maximum concentration at the edges. This difference in distributions indicated different deposition and retention mechanisms between T and D. In contrast, deposition profiles of T concentrations on the castellated surfaces extended up to ∼ 5 mm into the gap, i.e. were similar to those of D and metallic impurities found by ion beam analysis.

Originele taal-2	Engels
Artikelnummer	111959
Tijdschrift	Fusion Engineering and Design
Volume	160
DOI's	https://doi.org/10.1016/j.fusengdes.2020.111959
Status	Gepubliceerd - nov. 2020

Toegang tot document

10.1016/j.fusengdes.2020.111959

Andere bestanden en links

Link naar publicatie in Scopus

Citeer dit

Lee, S. E., Hatano, Y., Hara, M., Masuzaki, S., Tokitani, M., Oyaizu, M., Kurotaki, H., Hamaguchi, D., Nakamura, H., Asakura, N., Oya, Y., Likonen, J., Widdowson, A., Jachmich, S., Helariutta, K., & Rubel, M. (2020). Tritium distribution analysis of Be limiter tiles from JET-ITER like wall campaigns using imaging plate technique and β-ray induced X-ray spectrometry. Fusion Engineering and Design, 160, Artikel 111959. https://doi.org/10.1016/j.fusengdes.2020.111959

@article{205262b475d64d71ad27368bf1095f40,

title = "Tritium distribution analysis of Be limiter tiles from JET-ITER like wall campaigns using imaging plate technique and β-ray induced X-ray spectrometry",

abstract = "Tritium (T) distribution on the plasma-facing surfaces (PFSs) and inside castellation of Be limiter tiles from the JET tokamak with the ITER-like wall (ILW) was analyzed using imaging plate (IP) technique and β-ray induced X-ray spectrometry (BIXS). Regarding to PFSs, the outer poloidal limiter (OPL) showed significantly higher T concentrations than the inner wall guard limiter (IWGL) and upper dump plate (DP). The concentration of T on OPL was high at the central part. However, deuterium (D) and metallic impurities showed maximum concentration at the edges. This difference in distributions indicated different deposition and retention mechanisms between T and D. In contrast, deposition profiles of T concentrations on the castellated surfaces extended up to ∼ 5 mm into the gap, i.e. were similar to those of D and metallic impurities found by ion beam analysis.",

keywords = "Beryllium, ITER-like wall, Joint European Torus, Radiography, Tritium analysis",

author = "Lee, {S. E.} and Y. Hatano and M. Hara and S. Masuzaki and M. Tokitani and M. Oyaizu and H. Kurotaki and D. Hamaguchi and H. Nakamura and N. Asakura and Y. Oya and J. Likonen and A. Widdowson and S. Jachmich and K. Helariutta and M. Rubel",

note = "Publisher Copyright: {\textcopyright} 2020 The Author(s)",

year = "2020",

month = nov,

doi = "10.1016/j.fusengdes.2020.111959",

language = "English",

volume = "160",

journal = "Fusion Engineering and Design",

issn = "0920-3796",

}

Lee, SE, Hatano, Y, Hara, M, Masuzaki, S, Tokitani, M, Oyaizu, M, Kurotaki, H, Hamaguchi, D, Nakamura, H, Asakura, N, Oya, Y, Likonen, J, Widdowson, A, Jachmich, S, Helariutta, K & Rubel, M 2020, 'Tritium distribution analysis of Be limiter tiles from JET-ITER like wall campaigns using imaging plate technique and β-ray induced X-ray spectrometry', Fusion Engineering and Design, vol. 160, 111959. https://doi.org/10.1016/j.fusengdes.2020.111959

TY - JOUR

T1 - Tritium distribution analysis of Be limiter tiles from JET-ITER like wall campaigns using imaging plate technique and β-ray induced X-ray spectrometry

AU - Lee, S. E.

AU - Hatano, Y.

AU - Hara, M.

AU - Masuzaki, S.

AU - Tokitani, M.

AU - Oyaizu, M.

AU - Kurotaki, H.

AU - Hamaguchi, D.

AU - Nakamura, H.

AU - Asakura, N.

AU - Oya, Y.

AU - Likonen, J.

AU - Widdowson, A.

AU - Jachmich, S.

AU - Helariutta, K.

AU - Rubel, M.

PY - 2020/11

Y1 - 2020/11

N2 - Tritium (T) distribution on the plasma-facing surfaces (PFSs) and inside castellation of Be limiter tiles from the JET tokamak with the ITER-like wall (ILW) was analyzed using imaging plate (IP) technique and β-ray induced X-ray spectrometry (BIXS). Regarding to PFSs, the outer poloidal limiter (OPL) showed significantly higher T concentrations than the inner wall guard limiter (IWGL) and upper dump plate (DP). The concentration of T on OPL was high at the central part. However, deuterium (D) and metallic impurities showed maximum concentration at the edges. This difference in distributions indicated different deposition and retention mechanisms between T and D. In contrast, deposition profiles of T concentrations on the castellated surfaces extended up to ∼ 5 mm into the gap, i.e. were similar to those of D and metallic impurities found by ion beam analysis.

AB - Tritium (T) distribution on the plasma-facing surfaces (PFSs) and inside castellation of Be limiter tiles from the JET tokamak with the ITER-like wall (ILW) was analyzed using imaging plate (IP) technique and β-ray induced X-ray spectrometry (BIXS). Regarding to PFSs, the outer poloidal limiter (OPL) showed significantly higher T concentrations than the inner wall guard limiter (IWGL) and upper dump plate (DP). The concentration of T on OPL was high at the central part. However, deuterium (D) and metallic impurities showed maximum concentration at the edges. This difference in distributions indicated different deposition and retention mechanisms between T and D. In contrast, deposition profiles of T concentrations on the castellated surfaces extended up to ∼ 5 mm into the gap, i.e. were similar to those of D and metallic impurities found by ion beam analysis.

KW - Beryllium

KW - ITER-like wall

KW - Joint European Torus

KW - Radiography

KW - Tritium analysis

UR - http://www.scopus.com/inward/record.url?scp=85090038832&partnerID=8YFLogxK

U2 - 10.1016/j.fusengdes.2020.111959

DO - 10.1016/j.fusengdes.2020.111959

M3 - Article

AN - SCOPUS:85090038832

SN - 0920-3796

VL - 160

JO - Fusion Engineering and Design

JF - Fusion Engineering and Design

M1 - 111959

ER -

Tritium distribution analysis of Be limiter tiles from JET-ITER like wall campaigns using imaging plate technique and β-ray induced X-ray spectrometry

Samenvatting

Toegang tot document

Andere bestanden en links

Vingerafdruk

Citeer dit