Thermal analysis of an exposed tungsten edge in the JET divertor

G. Arnoux; J. Coenen; B. Bazylev; Y. Corre; G. F. Matthews; I. Balboa; M. Clever; R. Dejarnac; S. Devaux; T. Eich; E. Gauthier; L. Frassinetti; J. Horacek; S. Jachmich; D. Kinna; S. Marsen; Ph Mertens; R. A. Pitts; M. Rack; G. Sergienko; B. Sieglin; M. Stamp; V. Thompson

doi:10.1016/j.jnucmat.2014.11.005

Thermal analysis of an exposed tungsten edge in the JET divertor

G. Arnoux
, J. Coenen
, B. Bazylev
, Y. Corre
, G. F. Matthews
, I. Balboa
, M. Clever
, R. Dejarnac
, S. Devaux
, T. Eich
, E. Gauthier
, L. Frassinetti
, J. Horacek
, S. Jachmich
, D. Kinna
, S. Marsen
, Ph Mertens
, R. A. Pitts
, M. Rack
, G. Sergienko

B. Sieglin, M. Stamp, V. Thompson

Laboratory for Plasma Physics

EFDA-JET
FORSCHUNGSZENTRUM JULICH GMBH
Karlsruher Institut für Technologie
Commissariat à l'Énergie Atomique et aux Énergies Alternatives
Culham Centre for Fusion Energy
Institute of Plasma Physics, Academy of Sciences of the Czech Republic
Max Planck Institute for Plasma Physics
KTH Royal Institute of Technology
ITER

Onderzoeksoutput: Bijdrage aan een tijdschrift › Artikel › peer review

15 Citaten (Scopus)

Samenvatting

Abstract In the recent melt experiments with the JET tungsten divertor, we observe that the heat flux impacting on a leading edge is 3-10 times lower than a geometrical projection would predict. The surface temperature, tungsten vaporisation rate and melt motion measured during these experiments is consistent with the simulations using the MEMOS code, only if one applies the heat flux reduction. This unexpected observation is the result of our efforts to demonstrate that the tungsten lamella was melted by ELM induced transient heat loads only. This paper describes in details the measurements and data analysis method that led us to this strong conclusion. The reason for the reduced heat flux are yet to be clearly established and we provide some ideas to explore. Explaining the physics of this heat flux reduction would allow to understand whether it can be extrapolated to ITER.

Originele taal-2	Engels
Artikelnummer	48599
Pagina's (van-tot)	415-419
Aantal pagina's	5
Tijdschrift	Journal of Nuclear Materials
Volume	463
DOI's	https://doi.org/10.1016/j.jnucmat.2014.11.005
Status	Gepubliceerd - 22 jul 2015

Toegang tot document

10.1016/j.jnucmat.2014.11.005

Andere bestanden en links

Link naar publicatie in Scopus

Citeer dit

Arnoux, G., Coenen, J., Bazylev, B., Corre, Y., Matthews, G. F., Balboa, I., Clever, M., Dejarnac, R., Devaux, S., Eich, T., Gauthier, E., Frassinetti, L., Horacek, J., Jachmich, S., Kinna, D., Marsen, S., Mertens, P., Pitts, R. A., Rack, M., ... Thompson, V. (2015). Thermal analysis of an exposed tungsten edge in the JET divertor. Journal of Nuclear Materials, 463, 415-419. Artikel 48599. https://doi.org/10.1016/j.jnucmat.2014.11.005

@article{20fb73e724a046839f405d8cac7bc175,

title = "Thermal analysis of an exposed tungsten edge in the JET divertor",

abstract = "Abstract In the recent melt experiments with the JET tungsten divertor, we observe that the heat flux impacting on a leading edge is 3-10 times lower than a geometrical projection would predict. The surface temperature, tungsten vaporisation rate and melt motion measured during these experiments is consistent with the simulations using the MEMOS code, only if one applies the heat flux reduction. This unexpected observation is the result of our efforts to demonstrate that the tungsten lamella was melted by ELM induced transient heat loads only. This paper describes in details the measurements and data analysis method that led us to this strong conclusion. The reason for the reduced heat flux are yet to be clearly established and we provide some ideas to explore. Explaining the physics of this heat flux reduction would allow to understand whether it can be extrapolated to ITER.",

author = "G. Arnoux and J. Coenen and B. Bazylev and Y. Corre and Matthews, \{G. F.\} and I. Balboa and M. Clever and R. Dejarnac and S. Devaux and T. Eich and E. Gauthier and L. Frassinetti and J. Horacek and S. Jachmich and D. Kinna and S. Marsen and Ph Mertens and Pitts, \{R. A.\} and M. Rack and G. Sergienko and B. Sieglin and M. Stamp and V. Thompson",

note = "Publisher Copyright: {\textcopyright} 2014 Published by Elsevier B.V.",

year = "2015",

month = jul,

day = "22",

doi = "10.1016/j.jnucmat.2014.11.005",

language = "English",

volume = "463",

pages = "415--419",

journal = "Journal of Nuclear Materials",

issn = "0022-3115",

}

Arnoux, G, Coenen, J, Bazylev, B, Corre, Y, Matthews, GF, Balboa, I, Clever, M, Dejarnac, R, Devaux, S, Eich, T, Gauthier, E, Frassinetti, L, Horacek, J, Jachmich, S, Kinna, D, Marsen, S, Mertens, P, Pitts, RA, Rack, M, Sergienko, G, Sieglin, B, Stamp, M & Thompson, V 2015, 'Thermal analysis of an exposed tungsten edge in the JET divertor', Journal of Nuclear Materials, vol. 463, 48599, blz. 415-419. https://doi.org/10.1016/j.jnucmat.2014.11.005

TY - JOUR

T1 - Thermal analysis of an exposed tungsten edge in the JET divertor

AU - Arnoux, G.

AU - Coenen, J.

AU - Bazylev, B.

AU - Corre, Y.

AU - Matthews, G. F.

AU - Balboa, I.

AU - Clever, M.

AU - Dejarnac, R.

AU - Devaux, S.

AU - Eich, T.

AU - Gauthier, E.

AU - Frassinetti, L.

AU - Horacek, J.

AU - Jachmich, S.

AU - Kinna, D.

AU - Marsen, S.

AU - Mertens, Ph

AU - Pitts, R. A.

AU - Rack, M.

AU - Sergienko, G.

AU - Sieglin, B.

AU - Stamp, M.

AU - Thompson, V.

PY - 2015/7/22

Y1 - 2015/7/22

N2 - Abstract In the recent melt experiments with the JET tungsten divertor, we observe that the heat flux impacting on a leading edge is 3-10 times lower than a geometrical projection would predict. The surface temperature, tungsten vaporisation rate and melt motion measured during these experiments is consistent with the simulations using the MEMOS code, only if one applies the heat flux reduction. This unexpected observation is the result of our efforts to demonstrate that the tungsten lamella was melted by ELM induced transient heat loads only. This paper describes in details the measurements and data analysis method that led us to this strong conclusion. The reason for the reduced heat flux are yet to be clearly established and we provide some ideas to explore. Explaining the physics of this heat flux reduction would allow to understand whether it can be extrapolated to ITER.

AB - Abstract In the recent melt experiments with the JET tungsten divertor, we observe that the heat flux impacting on a leading edge is 3-10 times lower than a geometrical projection would predict. The surface temperature, tungsten vaporisation rate and melt motion measured during these experiments is consistent with the simulations using the MEMOS code, only if one applies the heat flux reduction. This unexpected observation is the result of our efforts to demonstrate that the tungsten lamella was melted by ELM induced transient heat loads only. This paper describes in details the measurements and data analysis method that led us to this strong conclusion. The reason for the reduced heat flux are yet to be clearly established and we provide some ideas to explore. Explaining the physics of this heat flux reduction would allow to understand whether it can be extrapolated to ITER.

UR - https://www.scopus.com/pages/publications/84937683554

U2 - 10.1016/j.jnucmat.2014.11.005

DO - 10.1016/j.jnucmat.2014.11.005

M3 - Article

AN - SCOPUS:84937683554

SN - 0022-3115

VL - 463

SP - 415

EP - 419

JO - Journal of Nuclear Materials

JF - Journal of Nuclear Materials

M1 - 48599

ER -

Thermal analysis of an exposed tungsten edge in the JET divertor

Samenvatting

Toegang tot document

Andere bestanden en links

Vingerafdruk

Citeer dit