Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates

Laurent Dusoulier; Samuel Denis; Michel Dirickx; Philippe Vanderbemden; Marcel Ausloos; Rudi Cloots; Bénédicte Vertruyen

doi:10.1557/proc-1001-m05-03

Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates

Laurent Dusoulier, Samuel Denis, Michel Dirickx, Philippe Vanderbemden, Marcel Ausloos, Rudi Cloots, Bénédicte Vertruyen

Communication, Information, Systems and Sensors

Université de Liège

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

We have studied the sintering parameters of YBa₂Cu ₃O_7-x (YBCO) coatings produced by electrophoretic deposition (EPD) on Ag and Ni substrates. The maximal sintering temperature is 930°C due to partial melting and chemical contamination for Ag and Ni substrates respectively. Increasing the sintering duration does not improve significantly the densification. When Ar sintering atmosphere is used, the coating density is strongly increased on Ag substrates while adhesion is poor on Ni substrates. The Ar-sintered YBCO coating deposited on planar Ag substrate displays a significant magnetic shielding effect for low frequency applied magnetic induction.

Original language	English
Title of host publication	Materials Research Society Symposium Proceedings - Progress in High-Temperature Superconductors
Publisher	Materials Research Society
Pages	6-11
Number of pages	6
ISBN (Print)	9781605604350
DOIs	https://doi.org/10.1557/proc-1001-m05-03
Publication status	Published - 2007
Event	Progress in High-Temperature Superconductors - 2007 MRS Spring Meeting - San Francisco, CA, United States Duration: 9 Apr 2007 → 13 Apr 2007

Publication series

Name	Materials Research Society Symposium Proceedings
Volume	1001
ISSN (Print)	0272-9172

Conference

Conference	Progress in High-Temperature Superconductors - 2007 MRS Spring Meeting
Country/Territory	United States
City	San Francisco, CA
Period	9/04/07 → 13/04/07

Access to Document

10.1557/proc-1001-m05-03

Cite this

Dusoulier, L., Denis, S., Dirickx, M., Vanderbemden, P., Ausloos, M., Cloots, R., & Vertruyen, B. (2007). Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates. In Materials Research Society Symposium Proceedings - Progress in High-Temperature Superconductors (pp. 6-11). (Materials Research Society Symposium Proceedings; Vol. 1001). Materials Research Society. https://doi.org/10.1557/proc-1001-m05-03

Dusoulier, Laurent ; Denis, Samuel ; Dirickx, Michel et al. / Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates. Materials Research Society Symposium Proceedings - Progress in High-Temperature Superconductors. Materials Research Society, 2007. pp. 6-11 (Materials Research Society Symposium Proceedings).

@inproceedings{0146f8990fef4bf6910b5f5861f3a168,

title = "Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates",

abstract = "We have studied the sintering parameters of YBa2Cu 3O7-x (YBCO) coatings produced by electrophoretic deposition (EPD) on Ag and Ni substrates. The maximal sintering temperature is 930°C due to partial melting and chemical contamination for Ag and Ni substrates respectively. Increasing the sintering duration does not improve significantly the densification. When Ar sintering atmosphere is used, the coating density is strongly increased on Ag substrates while adhesion is poor on Ni substrates. The Ar-sintered YBCO coating deposited on planar Ag substrate displays a significant magnetic shielding effect for low frequency applied magnetic induction.",

author = "Laurent Dusoulier and Samuel Denis and Michel Dirickx and Philippe Vanderbemden and Marcel Ausloos and Rudi Cloots and B{\'e}n{\'e}dicte Vertruyen",

year = "2007",

doi = "10.1557/proc-1001-m05-03",

language = "English",

isbn = "9781605604350",

series = "Materials Research Society Symposium Proceedings",

publisher = "Materials Research Society",

pages = "6--11",

booktitle = "Materials Research Society Symposium Proceedings - Progress in High-Temperature Superconductors",

note = "Progress in High-Temperature Superconductors - 2007 MRS Spring Meeting ; Conference date: 09-04-2007 Through 13-04-2007",

}

Dusoulier, L, Denis, S, Dirickx, M, Vanderbemden, P, Ausloos, M, Cloots, R & Vertruyen, B 2007, Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates. in Materials Research Society Symposium Proceedings - Progress in High-Temperature Superconductors. Materials Research Society Symposium Proceedings, vol. 1001, Materials Research Society, pp. 6-11, Progress in High-Temperature Superconductors - 2007 MRS Spring Meeting, San Francisco, CA, United States, 9/04/07. https://doi.org/10.1557/proc-1001-m05-03

Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates. / Dusoulier, Laurent; Denis, Samuel; Dirickx, Michel et al.
Materials Research Society Symposium Proceedings - Progress in High-Temperature Superconductors. Materials Research Society, 2007. p. 6-11 (Materials Research Society Symposium Proceedings; Vol. 1001).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates

AU - Dusoulier, Laurent

AU - Denis, Samuel

AU - Dirickx, Michel

AU - Vanderbemden, Philippe

AU - Ausloos, Marcel

AU - Cloots, Rudi

AU - Vertruyen, Bénédicte

PY - 2007

Y1 - 2007

N2 - We have studied the sintering parameters of YBa2Cu 3O7-x (YBCO) coatings produced by electrophoretic deposition (EPD) on Ag and Ni substrates. The maximal sintering temperature is 930°C due to partial melting and chemical contamination for Ag and Ni substrates respectively. Increasing the sintering duration does not improve significantly the densification. When Ar sintering atmosphere is used, the coating density is strongly increased on Ag substrates while adhesion is poor on Ni substrates. The Ar-sintered YBCO coating deposited on planar Ag substrate displays a significant magnetic shielding effect for low frequency applied magnetic induction.

AB - We have studied the sintering parameters of YBa2Cu 3O7-x (YBCO) coatings produced by electrophoretic deposition (EPD) on Ag and Ni substrates. The maximal sintering temperature is 930°C due to partial melting and chemical contamination for Ag and Ni substrates respectively. Increasing the sintering duration does not improve significantly the densification. When Ar sintering atmosphere is used, the coating density is strongly increased on Ag substrates while adhesion is poor on Ni substrates. The Ar-sintered YBCO coating deposited on planar Ag substrate displays a significant magnetic shielding effect for low frequency applied magnetic induction.

UR - http://www.scopus.com/inward/record.url?scp=70349932858&partnerID=8YFLogxK

U2 - 10.1557/proc-1001-m05-03

DO - 10.1557/proc-1001-m05-03

M3 - Conference contribution

AN - SCOPUS:70349932858

SN - 9781605604350

T3 - Materials Research Society Symposium Proceedings

SP - 6

EP - 11

BT - Materials Research Society Symposium Proceedings - Progress in High-Temperature Superconductors

PB - Materials Research Society

T2 - Progress in High-Temperature Superconductors - 2007 MRS Spring Meeting

Y2 - 9 April 2007 through 13 April 2007

ER -

Dusoulier L, Denis S, Dirickx M, Vanderbemden P, Ausloos M, Cloots R et al. Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates. In Materials Research Society Symposium Proceedings - Progress in High-Temperature Superconductors. Materials Research Society. 2007. p. 6-11. (Materials Research Society Symposium Proceedings). doi: 10.1557/proc-1001-m05-03

Influence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this