Characteristics of InAs0.8Sb0.2 photodetectors on GaAs substrates

Cengiz Besikci, Selcuk Ozer, Chris Van Hoof, Lars Zimmermann, Joachim John, Patrick Merken

Research output: Contribution to journalArticlepeer-review

Abstract

As an alternative to HgCdTe, InAsxSb1-x is an important alloy providing bandgaps suitable for infrared detection in both 3-5 and 8-12 μm atmospheric windows. There has been interest in high-quality growth of this material on GaAs and Si substrates. This paper reports the fabrication and characteristics of mid-infrared InAs0.8Sb0.2 photodetectors grown on GaAs substrates by molecular beam epitaxy. Peak detectivities of 1.4 × 1010 and 7.5 × 108 cm Hz1/2 W-1 were measured at 77 K and 240 K, respectively, showing that the alloy is promising as an alternative to thermal detectors for near room temperature operation. A detailed analysis of the dark current showed that the reverse-bias differential resistance was limited by trap-assisted tunneling in a wide temperature range up to 150 K under low and moderately large reverse bias voltages. Noise measurements have shown that trap assisted tunneling is the source of 1/f noise which is increased with the addition of band to tunneling under large reverse bias. Our observations on InAs0.8Sb0.2 photodiodes show resemblance to those reported for HgCdTe detectors. The results are encouraging for the development of mid-infrared large area focal plane arrays on GaAs substrates.

Original languageEnglish
Pages (from-to)992-996
Number of pages5
JournalSemiconductor Science and Technology
Volume16
Issue number12
DOIs
Publication statusPublished - Dec 2001

Fingerprint

Dive into the research topics of 'Characteristics of InAs0.8Sb0.2 photodetectors on GaAs substrates'. Together they form a unique fingerprint.

Cite this