Performance comparison of oxidizer injectors in a 1-kN paraffin-fueled hybrid rocket motor

M. Bouziane, A. E.M. Bertoldi, P. Milova, P. Hendrick, M. Lefebvre

Publikation: Beitrag in FachzeitschriftArtikelBegutachtung

Abstract

To investigate the effects of oxidizer injection on the performance of hybrid rocket motors (HRMs), we have designed, manufactured and tested four types of injector: showerhead (SH), hollow-cone (HC), pressure-swirl (PSW) and vortex (VOR). This study is motivated by the fact that the experimental measurements of N2O/paraffin firings are poorly presented in the open literature. Besides few publications are dedicated to the characterization of novel types of injectors in hybrid rocket propulsion application such as HC, PSW, and VOR. It is advantageous that the study was conducted in the same motor configuration, with the advantage that it allowed to compare the performance of different types of injectors. This paper analyzes the influence of the oxidizer injector design on the main performance parameters, such as fuel regression rate, specific impulse and combustion efficiency. First, in order to observe injector spray qualities, a series of cold tests using liquid water and liquid nitrous oxide are carried out, providing a good understanding of the spray profiles. Then, the motor performance data is obtained by a series of firing tests using N2O as oxidizer and paraffin as fuel. Comparison of the various injectors data is made with the same average oxidizer mass flux and feeding pressure. The showerhead is used as a benchmark in this study. During this experimental analysis, the VOR injector exhibits the highest regression rate, followed by HC and SH. Because the assessment of the regression rate was not enough to explain all the effects of the injectors on the motor performance, firing tests of small-scale hybrid motor have been carried out. In terms of spray properties, the PSW exhibits significant differences compared with the other injectors; it generates the smallest Sauter Mean Diameter (SMD) in the formed spray and achieves good atomization. In spite of the fact that the PSW injector leads to the lowest regression rate, it provides good specific impulse, increases the oxidizer-to-fuel ratio (O/F), as well as a uniform and smooth consumption of the paraffin fuel grain. VOR leads to the highest specific impulse. In terms of stability, VOR, HC and SH injectors exhibit lower oscillations in the chamber pressure. Some observations are made on exhaust plume intensity developed during combustion, and in firing tests with SH a blow-out phenomenon occur often. Similarly to liquid engines, it is possible in hybrid motors to increase the global propulsive performance using alternative designs of the injection system.

OriginalspracheEnglisch
Seiten (von - bis)392-406
Seitenumfang15
FachzeitschriftAerospace Science and Technology
Jahrgang89
DOIs
PublikationsstatusVeröffentlicht - Juni 2019

Fingerprint

Untersuchen Sie die Forschungsthemen von „Performance comparison of oxidizer injectors in a 1-kN paraffin-fueled hybrid rocket motor“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren